Milking Machine for Cow Electric Milker 3L Portable Pulsation Vacuum Pump Automa

  

13L Bottle, 2Milking Cups, 1Power Adapter, 1Milking Hose, 1Pump Hose, 1Pump, 2 Tube Cleaning Brush, 1User Manual. About once every second, to massage the nipple and maintain normal blood flow. Provide a comfortable and soft milking experience for your goats.

Milking machine for food-grade silicone. Unique designed for goat, inner surfaces are very smooth.

The pulsation system works like a calf or lamb sucking milk. In order to prevent damage or pain to the nipple due to the continuous vacuum, the pulsation system will cause the pads of the nipple to collapse on and under the nipple. It comes with brief but clear directions on how to assemble, use, and clean.

2 cleaning brushes are also included in the package to clean the hose and teat cup more efficiently. The motor draws air from the milk storage tank through the air suction pipe. It does not directly touch the cow and goat milk and will not pollute the cow and goat milk.

Using this milking machine can save at least one-half of the labor. It makes life on the farm much easier! We suggest that you put two thumbs in the milking cup to test whether the machine works. It should be noted that both thumbs and sheep breasts need to be as close as possible to the milking cup in order to work properly. Clip on the hose which is used to milk with 1PCS chamber teat cup when another teat is empty to make sure lock the clip completely.

The lid of bucket with a sealing ring to prevent leak and make sure vacuum situation when milker working. Cow Milking Machine, It makes life on the farm much easier! Cow milking machine with 3L stainless steel bucket is an ideal tool in milking, storing and transporting fresh milk in dairy farm. Don't have to tolerate cold in winter or sweated in summer when milking. Automatically Stop When the Milk is Full.

It will trigger the automatic stop device located on the inside of the lid when the milk reaches the set amount. The sound of the pump will change at this time and it will automatically stop milking to protect the host and avoid milk spilling. The service life of the milk machine will be extended times in this way. 2PCS, Stainless steel & Food-grade silicone material, OD 23mm, ID 58mm. Adjustable speed vacuum pulsation pump, Pump Hose, Milker Hose, Power Adapter, Tube Cleaning Brush, User Manual.

INPUT: AC100-240V 50/60Hz; OUTPUT: DC12V--3A. The milk bucket must be placed on a level ground and cannot be overturned or tilted, to avoid milk being sucked into the host and harming the motor. If it is not possible to secure the milk bucket, you can use the accompanying packaging box to secure it. When using, must fasten the lid of the milk bucket, otherwise the motor will work but do not milk. Before use, be sure to wet the teat with warm water, turn on the power, turn on the white milk cup valve, and set the maximum speed. In pulsating vacuum mode, the milk cup will gradually fit tightly with the teat, and then massage the nipple, which will make the milking process more gentle and easier. After the milk flows smoothly, the speed can be adjusted to slow down.

If the milk cannot be squeezed out all the time, it is necessary to remove the milk cup that cannot be squeezed out in a timely manner, and wet the teat again, repeating this process. Otherwise, the plastic milk bucket will shrink due to pressure.

We suggest that you put two thumbs in the milking cup to test whether the machine works. After using it for a period of time, the suction may decrease or there may be no suction, which may be due to these reasons. Check all transparent hoses for any damage. Open the lid of the milk bucket, tighten the nuts of the two pillars, and check whether the sealing rings attached to the bucket lid are intact. It comes with brief but clear directions on how to assemble, use, and clean. Please read the user manual carefully so that you can have a good shopping experience.