Using a milking machine saves at least one-half of the labor and time. The milk bucket lid equipped with a check valve that prevents the milk flow into the pump when the milk is full. Milking machine for food-grade silicone. Unique designed for goat, inner surfaces are very smooth.
The pulsation system works like a calf or lamb sucking milk. In order to prevent damage or pain to the nipple due to the continuous vacuum, The pulsation system simulates artificial milking techniques, without harming the animal's breasts, providing a comfortable milking experience for your cow or goat. Electric Automatic Pulsation Vacuum Milker? Goat Milking Machine will trigger the automatic stop device located on the inside of the lid when the milk reaches the set amount. The sound of the pump will change at this time and portable milker will automatically stop milking to protect the host and avoid milk spilling.
The lid of bucket with a sealing ring to prevent leak and make sure vacuum situation when milker working. The motor draws air from the milk storage tank through the air suction pipe. Milker machine does not directly touch the cow and goat milk and will not pollute the cow and goat milk. Quick installation, plugged in to use, easy to clean with 2 brushes, with the least technical experience, anyone can use, even your kids can help to do the extracting work for you. Cow Milking Machine, It makes life on the farm much easier! Cow milking machine with 10L stainless steel bucket is an ideal tool in milking, storing and transporting fresh milk in dairy farm.Don't have to tolerate cold in winter or sweated in summer when milking. Using this milking machine can save at least one-half of the labor. Automatically Stop When the Milk is Full. It will trigger the automatic stop device located on the inside of the lid when the milk reaches the set amount.
The sound of the pump will change at this time and it will automatically stop milking to protect the host and avoid milk spilling. The service life of the milk machine will be extended times in this way. The milk bucket must be placed on a level ground and cannot be overturned or tilted, to avoid milk being sucked into the host and harming the motor. If it is not possible to secure the milk bucket, you can use the accompanying packaging box to secure it.
When using, must fasten the lid of the milk bucket, otherwise the motor will work but do not milk. Before use, be sure to wet the teat with warm water, turn on the power, turn on the white milk cup valve, and set the maximum speed. In pulsating vacuum mode, the milk cup will gradually fit tightly with the teat, and then massage the nipple, which will make the milking process more gentle and easier. After the milk flows smoothly, the speed can be adjusted to slow down. If the milk cannot be squeezed out all the time, it is necessary to remove the milk cup that cannot be squeezed out in a timely manner, and wet the teat again, repeating this process.
When using, PLS must fasten the lid of the milk bucket, otherwise the motor will work but do not milk. We suggest that you put two thumbs in the milking cup to test whether the machine works. It should be noted that both thumbs and sheep breasts need to be as close as possible to the milking cup in order to work properly.We are updating the adapter and a more durable adapter is on the way! The sound of the vacuum pump will gradually increase depending on the suction force!
If you mind, please choose carefully! After using it for a period of time, the suction may decrease or there may be no suction, which may be due to these reasons. Check all transparent hoses for any damage. Open the lid of the milk bucket, tighten the nuts of the two pillars, and check whether the sealing rings attached to the bucket lid are intact. It comes with brief but clear directions on how to assemble, use, and clean.
Please read the user manual carefully so that you can have a good shopping experience. Made of durable plastic material. More suction, smaller, lighter and quieter than aluminium housings. Especially: perfumes, flammable items, liquids. If you have any doubt that your item may not be available for your location, send us a message before placing your order.
We apologize for any inconvenience this may cause. If you are not satisfied, do not like it or have any problems, send us a message before opening any case, we will guide you through the return or replacement procedure. We want be sure that all our costumers are happy, so if something doesn't fit to you, please let us know before leaving any feedback :!